LED Strip COB NEON 1260 / 12 VDC / 5m – Cool White

LED Strip COB NEON 1260 / 12 VDC / 5m – Cold White

This innovative LED strip is crafted using COB (Chip-on-Board) technology, providing a continuous line of light without visible shining points. With a density of 528 LEDs per meter, this strip ensures high brightness and a wide viewing angle.

The strip features a self-adhesive 3M LSE mounting tape for easy installation, and the diodes used are known for their long lifespan and reliable performance.

Key Features:

• Length: 5 meters
• Width: 8mm
• LED Density: 528 LEDs/m
• Service Life: Long-lasting, trouble-free operation
• Cuttable: Can be cut into shorter sections, each consisting of 24 diodes (minimum length: 45.45mm)
• Power Supply: 12 V DC (make sure to use a stabilized DC power supply with a 20% power margin)

Installation Instructions:

• Ensure the mounting surface is clean, dust-free, and degreased for optimal adhesion and performance.
• Proper heat dissipation is crucial for the longevity of the LED strip.
• It is essential to use stabilized DC power supplies, and the LED strips should not exceed 5 meters in a single section. For longer installations, power the strips bilaterally or in multiples of 5 meters to avoid voltage drops and ensure the rated lifespan.

Important Notes:

• Do not connect the tape directly to a 230V power supply – this could cause electric shock and damage to the product.
• The tape can be used in dry, dust-free indoor environments (IP20 rating).
• Cut only in the designated cutting areas marked on the strip, and ensure the power is off before cutting.
• The electrical installation must be equipped with short-circuit, overload, and overvoltage protections.