LED Strip COB NEON 1260 / 12 VDC / 1m – Warm White

LED Strip COB NEON 1260 / 12 VDC / 1m – Warm White

An innovative LED strip made with COB technology. The LED connectors are applied to the tape base with a density of 528 LEDs per meter, achieving a continuous line of light without visible bright spots. The tape features self-adhesive 3M LSE mounting tape for easy installation.

The diodes used in this strip are characterized by high brightness and a wide viewing angle, ensuring long-lasting and trouble-free operation. The strip is also cuttable, with each section containing 24 diodes, and the minimum length being 45.45mm. The strip has a substrate width of 8mm and comes in a 1-meter length.

For optimal performance, ensure the mounting location allows for proper heat dissipation, which is crucial for the strip’s longevity. The surface must be clean, free from dust and dirt, and degreased before installation.

This strip is designed for 12 V DC power supply. Proper power connections are indicated on the strip.

Important Notes:

• Do not connect the strip directly to a 230V network to avoid electrical shock and damage to the product.
• Use stabilized DC power supplies and ensure the power supply has a 20% power margin above the strip’s nominal power.
• For installations longer than 1 meter, avoid connecting the strip in sections exceeding 1 meter. Longer installations should be powered from both ends or kept at multiples of 5 meters to avoid voltage drops.
• IP20 protection rating means the strip is suitable for indoor use only, in dust-free and dry environments.
• Only cut the tape at the designated cutting points; cutting elsewhere may damage the strip. Always ensure the power is off before cutting.
• The electrical installation must have short-circuit, overload, and overvoltage protection.