LED Strip COB NEON 1260 / 12 VDC / 1.2m – Warm White

LED Strip COB NEON 1260 / 12 VDC / 1.2m – Warm White

This innovative LED strip uses COB technology, ensuring a continuous line of light without visible spots, thanks to 528 LEDs per meter. The self-adhesive 3M LSE mounting tape makes installation easy. The high brightness and wide viewing angle of the diodes offer superior lighting, with a long service life for reliable, trouble-free operation.

The LED strip can be cut into shorter sections. Each segment consists of 24 diodes, with a minimum length of 45.45mm. The strip has a substrate width of 8mm and a total length of 1.2m.

Installation Notes:

• Ensure the mounting location allows for proper heat dissipation, which is crucial for the longevity of the LED strip.
• Prepare the surface by removing dust and dirt, and degrease it before installation.
• Designed for a 12 V DC supply, with clear markings on the base to guide proper connection.

Important:

• Never connect the strip directly to a 230V network to avoid electric shock and damage.
• Use a stabilized DC power supply, ensuring a 20% power margin over the strip’s nominal power.
• It’s not recommended to connect LED strips longer than 1.2m in a single section. For installations longer than 5m, power the strips bilaterally or use multiples of 1.2m to avoid voltage drops and ensure a long lifespan.
• The IP20-rated tape is suitable for indoor use in dry, dust-free environments.
• Only cut the tape in the designated cutting areas. Cutting elsewhere may damage the strip.
• Always turn off the power before cutting the tape.

Ensure your electrical installation includes protection against short circuits, overloads, and overvoltage for safe operation.